Low Impedance Injectors w/ Resistor Pack Compatibility

[flynace]

In the traction control manual it states:

1.4.6 Injector Resistance
Ensure that the injectors are not of a resistance lower than 4 ohms as the traction control cannot cope with the amount of current driving such injectors.
In general terms Racelogic Traction Control is only compatible with standard high impedance injectors.

Is this true even if your low impedance injects are run through resistor packs?

Or must you always use high impedance injectors?

Thanks

[Jonnie]

In the traction control manual it states:

1.4.6 Injector Resistance
Ensure that the injectors are not of a resistance lower than 4 ohms as the traction control cannot cope with the amount of current driving such injectors.
In general terms Racelogic Traction Control is only compatible with standard high impedance injectors.

Is this true even if your low impedance injects are run through resistor packs?

Or must you always use high impedance injectors?

Thanks

Hi Flynace,

Could you tell me the make and model of the injectors you're planning to use please?
This is something we've never done before. I wouldn’t recommend using "resistor packs". It sounds a bit dodgy to me, especially if it goes wrong and you face a ££££ bill for a new engine!

If you wanted to source large capacity low impedance injectors, 'Injector Dynamics' produce some good kit :thumbsup: http://www.injectordynamics.com/

Regards,
Jonnie.

[Mike Broadbent]

Actually it can be done - Dan at Advanced Motorsport and Engineering supplies such a thing when he fits a TC system to a heavily tuned car that is running low impedance injectors.

Give him a call: www.advancedme.co.uk (http://www.advancedme.co.uk/)

[Jonnie]

Actually it can be done - Dan at Advanced Motorsport and Engineering supplies such a thing [/URL]

.....you learn something new everyday! *BOOM*

[flynace]

The application is a Toyota MR2 Turbo which comes stock with low impedance injectors and an inline resistor pack.

Just wanted to confirm that the Racelogic TC is compatible with that type of setup based on the warning in the manual.

Thanks