about speed display

[lir_wh]

in the mode of "speed display", how can performancbox display decimal, like XX.X, it's important for us.

[Jonnie]

in the mode of "speed display", how can performancbox display decimal, like XX.X, it's important for us.

Hi lir_wh,

On the PerformanceBox, the speed displayed on screen is only 'XX' not 'XX.X'. However, if you load the data file into VBOX Tools or PerformanceTools the value for speed should be interpolated to 2dp.

I hope this helps

Regards,
John.

[lir_wh]

Hi lir_wh,

On the PerformanceBox, the speed displayed on screen is only 'XX' not 'XX.X'. However, if you load the data file into VBOX Tools or PerformanceTools the value for speed should be interpolated to 2dp.

I hope this helps

Regards,
John.

It helps, now I know I should stop trying, but it's bad news. pb has the accuracy of 0.2km/h, resolution of 0.01km/h, it should display at least 1dp.

[Jonnie]

in the mode of "speed display", how can performancbox display decimal, like XX.X, it's important for us.

Unfortunately speed display mode will only show speed to 1km/h. If you require on screen speed to 1 decimal place, please use the speed readout in PerformanceMode.

Regards,
John.

[lir_wh]

Unfortunately speed display mode will only show speed to 1km/h. If you require on screen speed to 1 decimal place, please use the speed readout in PerformanceMode.

Regards,
John.

Yes, I use it as you say, but too small font.

[Jonnie]

Hi Chris,

Out of interest what testing are you doing?

Regards,
John.

[lir_wh]

Hi Chris,

Out of interest what testing are you doing?

Regards,
John.

Inside sound level under constant speed. It is hard to control vehicle speed in +/-1km/h without decimal displayed.