VBOX Touch History

Stock code:
Latest update:

Version - 30 July 2021

 - [New] Added secondary (multiple test) and best result acceleration screens
 - [New] Option to ignore double-distance laps
 - [New] Serial output
 - [New] Constellation and correction age channels (VBOX Touch RTK only)

 - [Fix] Screen and VBO behaviour now matches with <4 satellites
 - [Fix] Resolved slight result difference between screens at times (due to rounding)
 - [Fix] Improved stability if card is removed whilst logging

 - [Change] New menu layout with quicker access to each area

 Version - 5 May 2021

 - [New] Support for new hardware with RTK capability VBOX Touch RTK (VBTOUCHR) 
 - [New] Update to the sats icon to show RTK float and fix (VBOX Touch RTK only) 
 - [New] Receiver settings menu: (VBOX Touch RTK only)
                - NTRIP mode allows users to output a GGA NMEA message
                - DGPS baud rate can be set for incoming RTK corrections              
                - Able to choose to track Beidou or Glonass as a 3rd constellation with GPS and Galileo tracked as default 
 - [New] Diagnostics page now give users a breakdown of the number of sats tracked from each constellation (VBOX Touch RTK only)

 - [Fix] Resolved issue with the trigger event time not being reported in the vbo if the trigger is on during bootup


Version - 8 March 2021

 -[New] Added support for logging control via external switch 
 -[New] Added brake trigger test functionality

 -[Fix] Fixed speed dropout at high speed (~225mph and above) 
 -[Fix] Screenshots could cause unexpected behaviour 
 -[Fix] Unit could randomly become unresponsive 
 -[Fix] Inaccurate position in files before sat lock is obtained 
 -[Fix] Left arrow could incorrectly show as available 
 -[Fix] Crash could occur during setting of manual gates 
 -[Fix] Manually loaded reference lap was not retained through power cycle

 -[Change] Results for an acceleration test will remain on screen until 5km/h 
 -[Change] 0-Speed-0 test alert at target speed rather than end 
 -[Change] Result history list improvements 
 -[Change] Minor UI tweaks 
 -[Change] Reworded message shown when no tracks are found in the database 
 -[Change] Speed smoothing value now 0.25 by default 
 -[Change] End of test alert now enabled by default 
 -[Change] Increased maximum satellites used to 12

Version - 25 August 2020

 -[New] Performance tests now reset upon satellite drop
 -[Fix] Performance test results now displayed properly on the results table pages

Version - 21 May 2020

- [Fix] Improves screen responsiveness when changing modes 
- [Fix] Improved delta time colours around 0.00s 
- [Fix] Loading same gates no longer cause lap data to reset 
- [Fix] Resolved unit freezing on satellite acquisition in certain conditions

Version - 4 May 2020

 New Features:
 - Ability to add/clear a seperate finish line
 - Standing start lap timing mode
 - DB scanner slope correction mode for accel tests
 - Time and date settings
 - White logging icon to show logging is primed and waiting for Real Time Clock to sync

 - Faster boot times
 - Mode alerts 

Version - June 2019

 Initial release