VBOX Setup Software History

Stock code:
Version:
Latest update:

3.1.4.636
10/2020

Auto-update only - March 2021
-----------------------------

NEW FEATURES AND FUNCTIONALITY 
- Adds CAN ID support for VBOX IISX/SL (plugin 2.0.7)



3.1.4.636 - October 2020
---------------------------

NEW FEATURES AND FUNCTIONALITY 
- Adds support for VBOX IISX/SL (plugin 2.0.4)
	
	
3.1.3.630 - August 2020
---------------------------

NEW FEATURES AND FUNCTIONALITY 
- Adds support for VB3i 2.7 with refreshed UI. (plugin 3.2.24)
- IMU Robot blend option
- Ability to configure Wheel speed inputs
- New CAN ID's, 329 (X,Y position) & 32A (Robot nav, position quality)
- Warning message to allow IMU to sync before entering setup


BUG FIXES
- VCI dbc export issues resolved
- KF offset wording change
	
	
3.0.5.596 - October 2019
---------------------------

NEW FEATURES AND FUNCTIONALITY 
- Adds support for VB3iS. 
- Includes updated FIM03 plugin.
- Installer contains latest VB3i plugin, previously only available on auto-update.  

BUG FIXES
- Brake Trigger byte on FIM03 now correctly limited.


3.0.4.582 – August 2019
--------------------------- 
 - VB3i plug-in release 3.0.30: Dual Antenna Slip offsets not setting correctly has been fixed
 - VB3i plug-in release 3.0.29: RCF feature has been improved 



3.0.4.582 - March 2019
--------------------------- 
BUG FIXES 
  - Fixed bug for an IMU03 channel problem when switching between configuration modes.


v3.0.2.571 - February 2019
---------------------------
NEW FEATURES & FUNCTIONALITY
 - Added Compatibility with VB3i Firmware Version 2.6
 - Added options for new 3-Target Mode
 - Changed Wording of Single Target and Multi-Target to 1-target and 2-target respectively

BUG FIXES
 - Fixed bug where VCI Channel Information wasn’t updated correctly if only  
 - Message Configuration (Start Bit, Length, etc) had been changed manually within software


v2.1.21.546 - February 2018
---------------------------
NEW FEATURES & FUNCTIONALITY

 - VB3i configuration
   - Vehicle CAN database added.
   - Added ADAS mode setting to IMU Kalman Filter configuration.
   - Update to Racelogic CAN output table.
   - Added information for connected CANHUB.
   - Improved channel presentation for large CAN files.

BUG FIXES

 - Module configuration fixes
 - CAN02 baud rate setting fix.
 - FIM03 properties UI fix.

 - VB3i configuration...
   - no longer prevents the user from adding VCI CAN channels when separate Racelogic CAN bus is maximised.
   - connected Multi-Function Display (DSP03) CAN channel parameter selection fix.



2.1.21.523 - November 2017
---------------------------

 - Adds support for CAN Hub
 - Fixes issue where some data on 306/309/314 wasn’t being saved in exported DBC file
 - Fixes issue where enabling dual antenna could cause module channels to temporarily disappear in Setup
 - Fixes issue where some Transmitted Identifiers were losing status on single antenna VB3i units
 - Improved speed when writing to VB3i with certain modules connected (e.g.IMU03)
 - Improves connection stability to VB3i units via USB and Bluetooth
 - Renamed Topnet to NTRIP
 - Each ? icon now links to relevant page on the Racelogic Support site



2.1.15.484 - Sept 2017
-----------------------
 
 - Adds support for configuring VBOX 3i Dual Antenna (VB3iSL-V5) units
 - Configuration files now improved:
   - Supports dual antenna mode/separation/offsets 
   - Now loads: Internal CAN Input channels, Leap seconds, CAN baud rate, CAN delay, Roof mount setting, DGPS/RTK mode
 - DGPS/RTK status in the UI is now refreshed after coldstart
 - Topnet and Moving Base modes now set correctly


2.1.15.474 - July 2017
-----------------------

 - Adds VB3i plugin (full configuration ability, to replace VBOX Tools)
 - Adds support for pass-by noise configuration of Mini Input Module (requires special VB3i firmware, contact support@racelogic.co.uk), and 2.0.634 or newer MIM firmware)
 - Multiple bug fixes
 - UI tweaks
 - New library used to improve connection reliability
 - General stability and performance improvements


2.0.7.418 - December 2016
--------------------------
 - Added support for VBSS100SLR (RTK enabled speed sensor) 
   Note this is not publicly available, for more information please contact Racelogic
 

2.0.5.156 - November 2016
--------------------------
 - VBMiC Plugin Updated 2.0.2
 - Bug Fix for #8331 - Extended ID's were not set correctly.


2.0.5.256 - June 2016
----------------------
 - Auto update functionality implemented
 - Bug fixes
 - Software renamed from Racelogic Config to VBOX Setup


1.1.69.687 - September 2015
----------------------------
 - Added support for TC8v2


1.1.68.662 - July 2015
-----------------------
 - Support for v1.7 of Speed Sensor firmware


1.2b78 - Dec 2014
------------------
 - Revised Serial Comms Protocol


1.1.76 - Dec 2013
------------------
 - Adds support for IMU04


1.0.52.87 - Oct 2012
---------------------
 - New C# version of Racelogic upgrader released.
 - Includes support of new V2 speed sensors and VDMS units.
 - Requires .NET framework.


3.6.0 build 03 - Feb 2010
--------------------------
 - Required to upgrade Speed Sensor.


3.2.7 build 02 - Dec 2009
--------------------------
 - Addition of OLED.
 - Fixed USB coms bug.


3.2.6 build 06 - Sept 2009
---------------------------
 - Addition of PBSport, Mining Truck MFD, Video VBOX,
 - OLED, LabSat, Speed Sensor, Micro Input Module, Video VBOX Lite.


3.1.3 build 01 - June 2008
---------------------------
 - Addition of VB3i, VBMICRO, and VB2SX5.


3.1.1 build 02 - Sept 2007
---------------------------
 - Addition of VB2SXSPS, VB20SL3, VBCANLOG01, GPS odometer.


2.2.2 build 01 - Feb 2007
--------------------------
 - Required to upgrade VB10SPS and VB2SX10.


2.1.2 build 00 - Nov 2006
--------------------------
 - Addition of VBS20SL, VB2SX and VB20SL.


2.0.1 build 55 - Jul 2006
--------------------------
 - Fixed a bug which prevented VBOX Minis from upgrading properly.


2.0.1 build 50 - Jun 2006
--------------------------
 - Required to upgrade the latest products in the VBOX range, notably VBOX Mini and VBS20SL (Speed Sensor with Slip Angle).


2.0.1 build 35 - Mar 2006
--------------------------
 - Required to upgrade some new and future products. Also required to upgrade new DriftBoxs.


2.0.1 build 33 - February 2006
-------------------------------
 - Fixes a few bugs in the previous version. Also required for upgrading certain new hardware.


2.0.1 build 22 - January 2005
------------------------------
 - This version of upgrader also enables DriftBoxs to be upgraded.


2.0.1 build 16 - December 2005
-------------------------------
 - This version of upgrader is required to upgrade VBOXs using the latest firmware, allowing the VBOXs to be compatible with VBOXTools software.


2.0.0 build 3 - October 2005
-----------------------------
 - This version of upgrader is required to be able to upgrade VBOXs with the latest firmware, allowing the VBOXs to be compatible with VBOXTools software.


5d - January 2005
-------------------
 - Internal code changes to selection options.


5c - November 2004
-------------------
 - This Version of software now allows a USB adapter to be used when performing firmware upgrades

5 - up to November 2004
------------------------